Bohmer Ball Valve

BOHMER
BALL VALVE
FULLY-WELDED

Supplier Bohmer Fully Welded Ball Valve

Bohmer Ball Valve

Bohmer Fully-Welded Ball Valve All-Round Dependability

Böhmer Fully-Welded ball valve are therefore welded through the entire cross-section. Thus, weakening of the construction, for example by stress corrosion cracking on the weld seams, is actively counteracted.

Bohmer Valve Features :
  • Operate reliably even under high pressure
  • No Surfaces liable to corosion
  • Desihned for use in critical areas
Bohmer Valve Pressure Rating :
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressure PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F

BOHMER
BALL VALVE
FULLY-WELDED

Supplier Bohmer Fully Welded Ball Valve

Bohmer Ball Valve

Bohmer Fully-Welded Ball Valve All-Round Dependability

Böhmer Fully-Welded ball valve are therefore welded through the entire cross-section. Thus, weakening of the construction, for example by stress corrosion cracking on the weld seams, is actively counteracted.

Bohmer Valve Features :
  • Operate reliably even under high pressure
  • No Surfaces liable to corosion
  • Desihned for use in critical areas
Bohmer Valve Pressure Rating :
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressure PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F

Bohmer Ball valve

Bohmer Fully Welded
Ball Valve District
Heating And Steam

Bohmer district heating ball valve for underground installation meet the requirements of the AD technical bulletin (“Merkablatt”) B9 for extruding of pipes.

Bohmer Valve Features :
  • From DN125 a trunnion
    mounted ball is standard
  • The square key is included
    in the delivery
Bohmer Ball Valve Materials :
  • Body: Forged Steel
  • Steel Ball: Stainless
  • Steel Stem: Stainless Steel
  • Ball seals: PTFE
  • Stem seals: EPDM
Size DN 6 up to DN1200 (on request up to DN1400)
Pressure up to PN40
Temperature up to +250°C (on request)


BOHMER
BALL VALVE

DISTRICT HEATING

Supplier Bohmer Fully Welded Ball Valve District Heating And Steam

Bohmer Ball valve

Bohmer Fully Welded
Ball Valve District
Heating And Steam

Bohmer district heating ball valve for underground installation meet the requirements of the AD technical bulletin (“Merkablatt”) B9 for extruding of pipes.

Bohmer Valve Features :
  • From DN125 a trunnion
    mounted ball is standard
  • The square key is included
    in the delivery
Bohmer Ball Valve Materials :
  • Body: Forged Steel
  • Steel Ball: Stainless
  • Steel Stem: Stainless Steel
  • Ball seals: PTFE
  • Stem seals: EPDM
Size DN 6 up to DN1200 (on request up to DN1400)
Pressure up to PN40
Temperature up to +250°C (on request)


BOHMER
BALL VALVE

DISTRICT HEATING

Supplier Bohmer Fully Welded Ball Valve District Heating And Steam

BOHMER
BALL VALVE 

SPLIT BODY

Supplier Bohmer Split-Body Ball Valve

Bohmer Ball Valve

Bohmer Split-Body Ball Valve Experts for Agressive Fluids

Bohmer Split body ball valve up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valve of this design are well suited for extremely abrasive and corrosive fluids.

Bohmer Valve Features :
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressuree PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F


BOHMER
BALL VALVE 

SPLIT BODY

Supplier Bohmer Split-Body Ball Valve

Bohmer Ball Valve

Bohmer Split-Body Ball Valve Experts for Agressive Fluids

Bohmer Split body ball valve up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valve of this design are well suited for extremely abrasive and corrosive fluids.

Bohmer Valve Features :
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressuree PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F


Bohmer Ball Valve

Bohmer Burried Ball Valve Hidden Champion

Bohmer buried pipes are complex in construction and are also subject to strict regulations to protect the environment.

Bohmer Valve Features :
  • Great Deal of time and money an make considerable effort
  • Offer almost no surfaces
    liable to corrosion
Bohmer Valve Options :
  • Vent / Drain-connections
  • Test connections
  • Position indicators
  • Actuators
  • Sealant injection pipes
  • Pressure-relieving extensions
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressuree PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F


BOHMER
BALL VALVE

BURIED

Supplier Bohmer Burried Ball Valve

Bohmer Ball Valve

Bohmer Burried Ball Valve Hidden Champion

Bohmer buried pipes are complex in construction and are also subject to strict regulations to protect the environment.

Bohmer Valve Features :
  • Great Deal of time and money an make considerable effort
  • Offer almost no surfaces
    liable to corrosion
Bohmer Valve Options :
  • Vent / Drain-connections
  • Test connections
  • Position indicators
  • Actuators
  • Sealant injection pipes
  • Pressure-relieving extensions
Size DN 3 – DN 1400 1/8 – 56 Inch
Pressuree PN 10 to PN 800 ANSI Class 150 to 2500
Temperature -180° to +650° C -292° to +1200° F


BOHMER
BALL VALVE

BURIED

Supplier Bohmer Burried Ball Valve

BOHMER
BALL VALVE 

SUBSEA

Supplier Bohmer Subsea Ball Valve

Bohmer Ball Valve

Bohmer Subsea Ball Valve

The Böhmer Subsea ball valve provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at
low line pressure.

Bohmer Valve Features :
  • Primary metal seated
  • Secondary Soft seated
  • Metal to metal seated
  • Fire protection
Bohmer Valve Materials :
  • Body: ASTM A350 LF2 or ASTM A694 F52 to F65
  • Trim: ASTM A350 LF2, Stainless Steel; Duplex
  • Sealings: FPM, HNBR, Nylon, PEEK, TCC
size ≤ 36 inch Class 1500 ≤ 48 inch Class 900 ≤ 56 inch Class 150 to 600
Body ASTM A350 LF2 or ASTM A694 F52 to F65
Trim ASTM A350 LF2, Stainless Steel; Duplex
Sealings FPM, HNBR, Nylon, PEEK, TCC

BOHMER
BALL VALVE 

SUBSEA

Supplier Bohmer Subsea Ball Valve

Bohmer Ball Valve

Bohmer Subsea Ball Valve

The Böhmer Subsea ball valve provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at
low line pressure.

Bohmer Valve Features :
  • Primary metal seated
  • Secondary Soft seated
  • Metal to metal seated
  • Fire protection
Bohmer Valve Materials :
  • Body: ASTM A350 LF2 or ASTM A694 F52 to F65
  • Trim: ASTM A350 LF2, Stainless
    Steel; Duplex
  • Sealings: FPM, HNBR, Nylon,
    PEEK, TCC
size ≤ 36 inch Class 1500 ≤ 48 inch Class 900 ≤ 56 inch Class 150 to 600
Body ASTM A350 LF2 or ASTM A694 F52 to F65
Trim ASTM A350 LF2, Stainless Steel; Duplex
Sealings FPM, HNBR, Nylon, PEEK, TCC

Bohmer Ball Valve

Böhmer DUF Multi-Way Ball Valve Versatile in Every Way

Bohmer DUF Multi-Way Ball valve are used for a variety of purposes. In shipping, for example, they ensure the smooth switching
of alternative fuels.

Bohmer Valve Features :
  • Ensure the smooth switching of
    alternative fuels
  • At the production of fine chemicals
  • Used within the production lines
Bohmer Valve Series :
Size Range Most sizes up to 10" (250mm)
Double-acting pneumatic 50–100 psi (345–690 kPa)
Pump and valve capacity reach 100% capacity at the same time

BOHMER
BALL VALVE

MULTI WAY

Supplier Bohmer Multi-Way Ball Valve

Bohmer Ball Valve

Böhmer DUF Multi-Way Ball Valve Versatile in Every Way

Bohmer DUF Multi-Way Ball valve are used for a variety of purposes. In shipping, for example, they ensure the smooth switching
of alternative fuels.

Bohmer Valve Features :
  • Ensure the smooth switching of alternative fuels
  • At the production of fine chemicals
  • Used within the production lines
Bohmer Valve Series :
Size Range Most sizes up to 10" (250mm)
Double-acting pneumatic 50–100 psi (345–690 kPa)
Pump and valve capacity reach 100% capacity at the same time

BOHMER
BALL VALVE

MULTI WAY

Supplier Bohmer Multi-Way Ball Valve

BOHMER
BALL VALVE 

INJECTION NOZZLE

Supplier Bohmer Injection Nozzles

Bohmer Ball Valve

Bohmer Injection Nozzles For Pipelines And Ball Valve

The performance of injection nozzles of conventional design decreases continuously during their utilization due to sedimentary deposits of the aggresive odorant and the additives in the gas.

Bohmer Valve Features :
  • Designed for use with sulfur containing
  • Decrease of risk–the connection prevents the direct contact with the odorant
  • Decontamination–by flushing the complete valve chain will be cleaned
  • Developed vaporizer enables a constant release of the odorant and reduces built up of residues
Bohmer Valve Series :
  • Bohmer IDR Injection Nozzle For Pipelines
  • Bohmer IDK Injection Nozzle For Ball Valve
size 1–24" (25–600mm)
Actuator Options lever and handwheel actuators.
Capacity High maximum flow capacity
Pressure Applications Ductile Iron plug valves with 250 lb

BOHMER
BALL VALVE 

INJECTION NOZZLE

Supplier Bohmer Injection Nozzles

Dezurik Balancing Valve

Bohmer Injection Nozzles For Pipelines And Ball Valve

The performance of injection nozzles of conventional design decreases continuously during their utilization due to sedimentary deposits of the aggresive odorant and the additives in the gas.

Bohmer Valve Features :
  • Designed for use with sulfur containing
  • Decrease of risk–the connection prevents the direct contact
    with the odorant
  • Decontamination–by flushing the complete valve chain will be cleaned
  • Developed vaporizer enables a constant release of the odorant and reduces built up of residues
Bohmer Valve Series :
size 1–24" (25–600mm)
Actuator Options lever and handwheel actuators.
Capacity High maximum flow capacity
Pressure Applications Ductile Iron plug valves with 250 lb