Ari Armaturen Control Valve
Ari Armaturen Control Valve
Pressure Regulating Valve
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure.
Ari Armaturen Features :
- Spring loaded
- Regulating plug
- Compact design
- Shaft plug guide
- Maintenance-free
- Standard bellows seal
- Exact and easy adjustment
Other Ari Armaturen :
Detail Specification
| Figure | 12753 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 350°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Pressure Regulating Valve
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine
planner to ensure.
Ari Armaturen Features :
- Spring loaded
- Regulating plug
- Compact design
- Shaft plug guide
- Maintenance-free
- Standard bellows seal
- Exact and easy adjustment
Other Ari Armaturen :
Detail Specification
| Figure | 12753 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 350°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Temperature Controller
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance control valve.
Ari Armaturen Features :
- Sensor pocket
- Manual control device
- Setting range is adjustable
- Exact and easy adjustment
- Over-temperature safety device
- Reliable, low maintenance operation
Ari Armaturen Series :
Detail Specification
| Figure | 12771 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Temperature Controller
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance control valve.
Ari Armaturen Features :
- Sensor pocket
- Manual control device
- Setting range is adjustable
- Exact and easy adjustment
- Over-temperature safety device
- Reliable, low maintenance operation
Ari Armaturen Series :
Detail Specification
| Figure | 12771 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Control Valve For Heating
Control valve are supplied complete with actuator fitted. It is not permitted to mantle / dismantle actuators with valve operating at service conditions (temperature and pressure).
Ari Armaturen Features :
- Spare part drawings
- Operating instructions
- Settings with over pressure
- Complete with actuator fitted
- pressure temperature diagram
- CAD symbols and tender specifications
Ari Armaturen Series :
Detail Specification
| Figure | 10485 |
| Pressure Nominal | PN 6 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 130°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Control Valve For Heating
Control valve are supplied complete with actuator fitted. It is not permitted to mantle / dismantle actuators with valve operating at service conditions (temperature
and pressure).
Ari Armaturen Features :
- Spare part drawings
- Operating instructions
- Settings with over pressure
- Complete with actuator fitted
- pressure temperature diagram
- CAD symbols and tender specifications
Ari Armaturen Series :
Detail Specification
| Figure | 10485 |
| Pressure Nominal | PN 6 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 130°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Electric Actuators Ari Premio
Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN.
Ari Armaturen Features :
- Handwheel
- Enclosure IP 54
- Travel indicator
- Torque-dependent switching off
- Require a thrust force of 0,85 kN
- Operative ambient temp 0°C to +50°C
Other Ari Armaturen :
Detail Specification
| Type | Premio 12kN |
| Voltage | 115 V |
| Temperature Rating | -20°C up to 70°C |
| Frequency | 60 hz |
| Current Type | AC |
Ari Armaturen Control Valve
Electric Actuators Ari Paco
Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN.
Ari Armaturen Features :
- Handwheel
- Enclosure IP 54
- Travel indicator
- Torque-dependent switching off
- Require a thrust force of 0,85 kN
- Operative ambient temp 0°C to +50°C
Other Ari Armaturen :
Detail Specification
| Type | Premio 12kN |
| Voltage | 115 V |
| Temperature Rating | -20°C up to 70°C |
| Frequency | 60 hz |
| Current Type | AC |
Ari Armaturen Control Valve
Electric Actuators Ari Paco
Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN. The linear actuators are adjusted to the thrust forces denoted in the technical data.
Ari Armaturen Features :
- Spare part drawings
- Operating instructions
- Settings with over pressure
- pressure temperature diagram
Ari Armaturen Series :
Detail Specification
| Type | Paco 0,85 D |
| Voltage | 24 V |
| Temperature Rating | 0°C up to 50°C |
| Frequency | 50/60 hz |
| Current Type | DC |
Ari Armaturen Isolation
Ari Armaturen Isolation Valve
Ari Faba Supra C
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve.
Ari Armaturen Features :
- Seat stellited
- Grooved gaskets
- External stem thread
- Plug with marginal seat
- Bellows seal 10.000 load cycles
- Guided plug, hardened / stellited
Other Ari Armaturen :
Detail Specification
| Figure | 35140...153 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | DN 65 |
| Temperature | -60°C up to 450°C |
| Material | 10619+N |
Ari Armaturen Isolation Valve
Ari Faba Supra C
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings
on the valve.
Ari Armaturen Features :
- Seat stellited
- Grooved gaskets
- External stem thread
- Plug with marginal seat
- Bellows seal 10.000 load cycles
- Guided plug, hardened / stellited
Other Ari Armaturen :
Detail Specification
| Figure | 35140...153 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | DN 65 |
| Temperature | -60°C up to 450°C |
| Material | 10619+N |
Ari Armaturen Isolation Valve
Butterfly Valve Ari Ziva Z
Gear type (actuation by hand wheel, clockwise for closing). The CLOSE-position can be adjusted by 5° by a stop screw. The stop screws are self-sealing and self-locking.
Ari Armaturen Features :
- Self-locking
- Soft sealing
- Maintenance-free
- Nodular iron body
- Stainless steel disc
- Centrical disc bearing
Other Ari Armaturen :
Detail Specification
| Figure | 22014 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 25/32 |
| Temperature | -10°C up to 80°C |
| Material | EN-JS1030 |
Ari Armaturen Isolation Valve
Check Valve Ari Checko V/D
We recommend fitting a flow stabilizing pipe at least 2 m in length or between 10 x DN and DN200 in diameter between the pump and the first stop valve in the pump discharge.
Ari Armaturen Features :
- Solid plug
- Precise plug
- Valve plate guidance
- Re-setting spring made of stainless
- Solid seat made of stainless material
- Valve plate made of stainless material
Other Ari Armaturen :
Detail Specification
| Figure | 12771 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Isolation Valve
Check Valve Ari Checko V/D
We recommend fitting a flow stabilizing pipe at least 2 m in length or between 10 x DN and DN200 in diameter between the pump and the first stop valve in the pump discharge.
Ari Armaturen Features :
- Solid plug
- Precise plug
- Valve plate guidance
- Re-setting spring made of stainless
- Solid seat made of stainless material
- Valve plate made of stainless material
Other Ari Armaturen :
Detail Specification
| Figure | 12771 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
ARI ARMATUREN
CHECK VALVE
ARI CHECKO
Ari Armaturen Isolation Valve
Ari-Strainer
The strainer screens must be cleaned regularly. Maintenance and maintenance-intervals have to be defined by the operator and depends on the degree of dirt accumulation in the system.
Ari Armaturen Features :
- Screen from DN50 with reinforced ring
- Screen from DN150 with supporting basket From Strainer
- Catalog Precise guidance of screen in cover and body
Other Ari Armaturen :
Detail Specification
| Figure | 10050 |
| Pressure Nominal | PN 6 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Isolation Valve
Globe Valve Ari Euro Wedi
With a fully open valve relieves the back seat of the elastomer sealing system. From DN65 upwards, the lift limitation nut has to be removed and then the valve.
Ari Armaturen Features :
- Free of PCB
- Soft sealing
- Maintenance-freez
- External stem thread
- Non-rising handwheel
- Double sealing mechanism
Other Ari Armaturen :
Detail Specification
| Figure | 10070 |
| Pressure Nominal | PN 6 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 120°C |
| Material | EN-JL1040 |
Ari Armaturen Isolation Valve
Globe Valve Ari Euro Wedi
With a fully open valve relieves the back seat of the elastomer sealing system. From DN65 upwards, the lift limitation nut has to be removed and then the valve.
Ari Armaturen Features :
- Free of PCB
- Soft sealing
- Maintenance-freez
- External stem thread
- Non-rising handwheel
- Double sealing mechanism
Other Ari Armaturen :
Detail Specification
| Figure | 10070 |
| Pressure Nominal | PN 6 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 120°C |
| Material | EN-JL1040 |
ARI ARMATUREN
GLOBE VALVE
ARI EURO WEDI
Ari Armaturen Safety Valve
Ari Armaturen Safety Valve
Safety Valve Ari-Safe
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
Other Ari Armaturen :
Detail Specification
| Figure | 12901 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15/25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-P
Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 12921 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-P
Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 12921 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
ARI ARMATUREN
SAFETY VALVE
ARI SAFE-P
Ari Armaturen Safety Valve
Safety Valve Ari Safe-TC
Open safety valve (open bonnet / open cap) are not permissible for fluids, dusty atmospheres, open air use or for any Group 1 fluids in accordance with Pressure Equipment Directive.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 25941 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | G1" XG1 1/2" |
| Temperature | -10°C up to 350°C |
| Material | EN-JS1049 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-TC
Open safety valve (open bonnet / open cap) are not permissible for fluids, dusty atmospheres, open air use or for any Group 1 fluids in accordance with Pressure
Equipment Directive.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 25941 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | G1" XG1 1/2" |
| Temperature | -10°C up to 350°C |
| Material | EN-JS1049 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-TCP
The valve are designed for standard operating conditions. If conditions exceed these requirements, e.g. aggressive or abrasive media, the operator should state the higher requirements when ordering.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
Other Ari Armaturen :
Detail Specification
| Figure | 57961 |
| Pressure Nominal | PN 100 |
| Nominal Diameter | G1" XG1" |
| Temperature | -60°C up to 300°C |
| Material | 14581 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-TCP
The valve are designed for standard operating conditions. If conditions exceed these requirements, e.g. aggressive or abrasive media, the operator should state the higher requirements when ordering.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
Other Ari Armaturen :
Detail Specification
| Figure | 57961 |
| Pressure Nominal | PN 100 |
| Nominal Diameter | G1" XG1" |
| Temperature | -60°C up to 300°C |
| Material | 14581 |
ARI ARMATUREN
SAFETY VALVE
ARI SAFE-TCP
Ari Armaturen Safety Valve
Safety Valve Ari Safe-SN ANSI
At DN15-32: If valve should be mounted directly to valve, the upper flange connecting bolts should be preferably executed with studs and hexagon nuts on both sides.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 32901 |
| Pressure Nominal | ANSI 150 |
| Nominal Diameter | 1 1/2" x2 1/2" |
| Temperature | -60°C up to 450°C |
| Material | SA216WCB |
Ari Armaturen Safety Valve
Safety Valve Ari
Safe-SN ANSI
At DN15-32: If valve should be mounted directly to valve, the upper flange connecting bolts should be preferably executed with studs and hexagon nuts on both sides.
Ari Armaturen Features :
- Wear resistant seat/disc
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen :
Detail Specification
| Figure | 32901 |
| Pressure Nominal | ANSI 150 |
| Nominal Diameter | 1 1/2" x2 1/2" |
| Temperature | -60°C up to 450°C |
| Material | SA216WCB |
Ari Armaturen Steam Trapping
Ari Armaturen Steam Trapping
Steam Trap Ari Cona-M
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Ari Armaturen Features :
- High sensitivity
- Installation in any position
- Exact control characteristic
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen :
Detail Specification
| Figure | 12610-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen
Steam Trapping
Steam Trap Ari Cona-M
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Ari Armaturen Features :
- High sensitivity
- Installation in any position
- Exact control characteristic
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen :
Detail Specification
| Figure | 12610-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
ARI ARMATUREN
STEAM TRAP
ARI CONA-M
Ari Armaturen Steam Trapping
Steam Trap Cona-TD
In the event of malfunction or faulty operating performance check that the installation and adjustment work has been carried out and completed in accordance with these Operating Instructions properly.
Ari Armaturen Features :
- Installation in any position
- Replaceable controller-unit
- Intermittent mode of operation
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen :
Detail Specification
| Figure | 45640-2 |
| Pressure Nominal | 40 |
| Nominal Diameter | Rp/BSP 1 |
| Temperature | -60°C up to 450°C |
| Material | 10460 |
Ari Armaturen
Steam Trapping
Steam Trap Cona-TD
In the event of malfunction or faulty operating performance check that the installation and adjustment work has been carried out and completed in accordance with these Operating Instructions properly.
Ari Armaturen Features :
- Installation in any position
- Replaceable controller-unit
- Intermittent mode of operation
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen :
Detail Specification
| Figure | 45640-2 |
| Pressure Nominal | 40 |
| Nominal Diameter | Rp/BSP 1 |
| Temperature | -60°C up to 450°C |
| Material | 10460 |
Ari Armaturen Steam Trapping
Steam Trap Ari Cona All In One
At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.
Ari Armaturen Features :
- Internal strainer
- Integrated non return protection
- Optimized design for quick installation
- Gasket-free sealing of the screwed cap
- Mounting position verical or horizontal
- Back pressure-free condensate discharge
Other Ari Armaturen :
Detail Specification
| Figure | 4560A-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 450°C |
| Material | 10460 |
Ari Armaturen
Steam Trapping
Steam Trap Ari Cona
All In One
At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.
Ari Armaturen Features :
- Internal strainer
- Integrated non return protection
- Optimized design for quick installation
- Gasket-free sealing of the screwed cap
- Mounting position verical or horizontal
- Back pressure-free
condensate discharge
Other Ari Armaturen :
Detail Specification
| Figure | 4560A-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 450°C |
| Material | 10460 |
ARI ARMATUREN
STEAM TRAP
CONA ALL
IN ONE
Ari Armaturen Steam Trap
Components and Accessories for Steam Range
Store the device in a dry, dirt-free location (temperature range: -40°C to +85°C. Don’t remove the electronics, valve or measuring amplifiers from the packaging.
Ari Armaturen Features :
- Patent applied
- Safe temperature sensor
- With single operation with relay outputs
- Continous monitoring of trap performance
Other Ari Armaturen :
Detail Specification
| Figure | 45685-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -60°C up to 250°C |
| Material | 10460 |
Ari Armaturen Steam Trap
Components and Accessories for Steam Range
Store the device in a dry, dirt-free location (temperature range: -40°C to +85°C. Don’t remove the electronics, valve or measuring amplifiers from the packaging.
Ari Armaturen Features :
- Patent applied
- Safe temperature sensor
- With single operation with relay outputs
- Continous monitoring of
trap performance
Other Ari Armaturen :
Detail Specification
| Figure | 45685-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -60°C up to 250°C |
| Material | 10460 |
Ari Armaturen Steam Trapping
Steam Trap Ari Cona-S
Condensate collection/steam distribution manifolds are used for the discharge/distribution/ collectioni of condensate, steam or hot water, Safety back seat when fully opened valve.
Ari Armaturen Features :
- Ventile wartungsarm
- Flexibility through compact
- No need for manifold remova
- Protection against energy loss
- Economic on-site handling and long life
- Safety back seat when fully opened valve
Other Ari Armaturen :
Detail Specification
| Figure | 12630-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen
Steam Trapping
Steam Trap Ari Cona-S
Condensate collection/steam distribution manifolds are used for the discharge/distribution/ collectioni of condensate, steam or hot water, Safety back seat when fully opened valve.
Ari Armaturen Features :
- Ventile wartungsarm
- Flexibility through compact
- No need for manifold remova
- Protection against energy loss
- Economic on-site handling and long life
- Safety back seat when fully
opened valve
Other Ari Armaturen :
Detail Specification
| Figure | 12630-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
